|
Pico’s ergonomically designed oscilloscope probes are suitable for use with all major brands of oscilloscopes as well as the Pico range of PC oscilloscopes.
TA041 : 25 MHz, 700 V Differential oscilloscope probe x10/x100
|
Related Links
Oscilloscope Accessories |
PC Oscilloscope
|
The TA041 is an active differential oscilloscope probe. The probe permits the measurement of signals which are not referenced to earth using a conventional earthed oscilloscope. This enables mains voltages to be tested. It is possible to measure and observe the waveforms of three phase supplies or the gate/control signals of semiconductor circuits. It is ideal for investigation of motor speed controls, uninterruptible power supplies, switch mode power supplies and process controllers.
TA041 Specification |
| Attenuation ranges |
10:1 / 100:1 |
| Differential Voltage Range |
±70 V (DC + Peak AC) or 70 V RMS (1/10)
±700 V (DC + Peak AC) or 700 V RMS (1/100) |
| Common Mode Voltage Range |
±700 V (DC + Peak AC)
or
700 V RMS (1/10 and 1/100) |
Absolute Maximum Voltage
(Differential or Common-Mode) |
±1400 V (DC + Peak AC)
or
1000 V RMS CAT III(1/10 and 1/100) |
| Bandwidth |
DC to 25 MHz (-3 dB) |
| Accuracy |
± 2% |
| Rise time |
14ns |
| Input impedance |
4 MΩ / 5.5 pF
each side to ground |
| Power requirements |
4 x AA cells
or
6 V / 60 mA DC mains adapter |
Accessories (Extra)
|
|
TA057 : 25 MHz, 1400 V Differential oscilloscope probe x20/x200
|
Related Links
Oscilloscope Accessories |
PC Oscilloscope
|
The TA057 is a CAT III rated differential oscilloscope probe that can measure up to ±1400 volts.
TA057 Specification |
| Bandwidth |
25 MHz |
| Common mode |
±1400 V |
| Differential |
±140 V, ±1400 V |
| Battery power |
Internal |
| Attenuation |
20:1, 200:1 |
| Input impedance |
4 MΩ / 5.5 pF |
| Safety rating |
CAT III |
Accessories (Extra)
|
|
TA058 : 50 MHz, 70 V Differential oscilloscope probe x10
|
Related Links
Oscilloscope Accessories |
PC Oscilloscope
|
The TA058 is a CAT I rated differential oscilloscope probe that can measure up to ±70 volts.
TA058 Specification |
| Bandwidth |
50 MHz |
| Common mode |
±700 V |
| Differential |
±70 V |
| Battery power |
Optional (TA047) |
| Attenuation |
10:1 |
| Input impedance |
1.6 MΩ / 7 pF |
| Safety rating |
CAT I |
Accessories (Extra)
- Power Supply (UK, EU)
- Battery Pack
- Probus Power Adapter
|
|
TA042 / TA043 / TA044 : 70-100 MHz, 700-7000 V Differential oscilloscope probes
|
Related Links
Oscilloscope Accessories |
PC Oscilloscope
|
The TA042, TA043 and TA044 are active differential oscilloscope probes. They let you use a conventional earthed oscilloscope to measure signals that are not referenced to ground, including mains voltages. They can also be used to measure and observe the waveforms of three-phase supplies or the gate and control signals of semiconductor circuits. They are ideal for investigating motor speed controls, uninterruptible power supplies, switch mode power supplies and process controllers.
Specification |
TA042 |
TA043 |
TA044 |
| Description |
100 MHz 1400 V
differential probe |
100 MHz 700 V differential probe |
70 MHz 7000 V differential probe |
| Attenuation |
100:1, 1000:1 |
10:1, 100:1 |
100:1, 1000:1 |
| Differential voltage ranges |
140 V DC + peak AC
100 V RMS |
70 V DC + peak AC
70 V RMS |
700 V DC + peak AC
500 V RMS |
1400 V + peak AC
1000 V RMS |
700 V DC + peak AC
500 V RMS |
7000 V DC + peak AC
5000 V RMS |
| Common mode range |
1400 V DC + peak AC
1000 V RMS |
700 V DC + peak AC
500 V RMS |
7000 V DC + peak AC
2500 V RMS |
| Bandwidth |
100 MHz |
100 MHz |
70 MHz |
| Accuracy |
2% |
2% |
2% |
| Rise time |
3.5 ns |
|
|
| Input impedance |
4 MΩ / 7 pF each side to ground |
4 MΩ / 7 pF each side to ground |
10 MΩ / 10 pF each side to ground |
| Power requirements |
4 x AA cells (supplied) |
4 x AA cells (supplied) |
4 x AA cells (supplied) |
| Safety rating to GND |
1400 V DC + peak AC
1000 V RMS
CAT III |
1000 V RMS
CAT III |
7000 V DC + peak AC
2500 V RMS
CAT I |
| Safety rating between inputs |
1400 V DC + peak AC
1000 V RMS CAT III |
1000 V RMS CAT III |
7000 V DC + peak AC
5000 V RMS |
| Test prod rating |
1000 V CAT III |
1000 V CAT III |
1000 V CAT I |
Accessories (Extra)
|
|
TA045 : 200 MHz, 20 V Differential oscilloscope probe x10
|
Related Links
Oscilloscope Accessories |
PC Oscilloscope
|
The TA045 is a precision differential probe designed for low-noise applications. An optional battery pack and Probus power adapter are also available.
TA045 Specification |
| Bandwidth |
200 MHz |
| Common mode |
±60 V |
| Differential |
±20 V |
| Battery power |
Optional (TA047) |
| Attenuation |
10:1 |
| Input impedance |
500 kΩ / 7 pF |
Accessories (Extra)
- Power Supply (UK, EU)
- Battery Pack
- Probus Power Adapter
|
|
TA046 : 800 MHz, 15 V Differential oscilloscope probe x10
|
Related Links
Oscilloscope Accessories |
PC Oscilloscope
|
The TA046 is a high-bandwidth differential probe. With a fast 800 MHz bandwidth it is ideal for measuring high-speed differential signals.
TA045 Specification |
| Bandwidth |
800 MHz |
| Common mode |
±30 V |
| Differential |
±15 V |
| Attenuation |
10:1 |
| Accuracy |
±2 % |
| Input Impedance |
100 kΩ / 2 pF |
Accessories (Extra)
|
