|
Current Clamps offer a safe, simple and accurate way to take current measurements. An essential item for any toolbox.
The Pico range of current clamps can be used with Pico oscilloscopes and data loggers, as well all major brands of oscilloscope and multimeters.
|
|
TA138 : 200 A AC Current Clamp (4 mm)
|
Related Links
Datalogger Accessories |
Data Loggers
|
Not being powered by batteries this unpowered current clamp is ideally suited to applications where current consumption is being monitored over long periods of time. Supplied with 4 mm (banana) plug type connectors.
| Range (1 mV/A) |
0.1A to 200A AC RMS |
| Accuracy |
±2%, ±0.5 A |
| Maximum output impedance |
1 kΩ/td>
|
| Maximum conductor size |
16 mm |
| Standards |
IEC1010-1 (1995)
EN61010-1 (2001)
Category II 600 V
Category III 300 V |
|
|
PP218 Current clamp (60A AC/DC)
|
Related Links
Datalogger Accessories |
Data Loggers
|
The PP218 is a 10 mA to 60 A current clamp, ideal for use with a Pico automotive oscilloscope for measuring the current drawn by smaller devices, such as fuel injectors and fuel pumps.
This current clamp will measure both AC and DC currents in the range 10 mA to 60 A. Features include a selectable calibrated voltage output. Supplied with 4 mm (banana) plug type connectors.
Note: the PP218 low amp probe is supplied with shrouded 4 mm (banana) plug type connectors so can not be plugged directly to a PicoScope oscilloscope. We recommend the use of the TA000 or TA020 automotive test lead to connect the current clamp to the oscilloscope. Alternatively, a PP264 60 A current clamp with BNC connector is available.
|
|
PP264 : Current clamp (60A AC/DC)
|
Related Links
Datalogger Accessories |
Data Loggers
|
PP264 low amp probe is an improved version of the PP218 60 amp current clamp and features superior noise rejection and is terminated in a BNC connector.
The PP264 is terminated in a BNC connector and so can be connected directly to the PicoScope oscilloscope.
| Range |
10 mA to 60 A AC/DC |
| AC Frequency Range |
Up to 20 kHz |
| Maximum conductor size |
9 mm |
| Operation temperature |
0°C to 50°C, 70% RH |
|
|
PP179 : Current clamp (600A AC/DC)
|
Related Links
Datalogger Accessories |
Data Loggers
|
The PP179 is a 600 amp current clamp, ideal for use with a PicoScope oscilloscope for displaying starter current waveforms, charging currents and for performing relative compression tests.
This current clamp can measure currents up to 600 A for both AC (up to 400 Hz) and DC currents. Features includes a low battery indicator. Supplied with 4 mm (banana) plug type connectors.
Note: the PP179 high amp probe is supplied with shrouded 4 mm (banana) plug type connectors so can not be plugged directly into the PicoScope. We recommend the use of the TA000 or TA020 automotive test lead to connect the current clamp to the oscilloscope. Alternatively, a PP266 600 A current clamp with BNC connector is available.
|
|
PP266 : Current clamp (600A AC/DC)
|
Related Links
Datalogger Accessories |
Data Loggers
|
The PP266 is an improved version of the PP179 600 A current clamp and features superior noise rejection and is terminated in a BNC connector.
The PP266 is terminated in a BNC connector and so can be connected directly to a Pico automotive oscilloscope.
| Accuracy |
DC |
0 to 600 A ± (2% reading +2A) |
| AC |
0 to 300 A ± (2% reading +2A) |
| AC |
300 A to 500 A ± (3% reading +2A) |
| AC |
500 A to 600 A ± (6% reading +2A) |
| AC frequency range |
50 Hz to 400 Hz |
| Voltage output |
1 mV per 1 A (0 to 600 mV AC & DC) |
| Max conductor size |
30 mm |
| Operating temp |
0°C to 50°C, 70% RH |
|
|
PP253 : Current clamp (2000A AC/DC)
|
Related Links
Datalogger Accessories |
Data Loggers
|
The PP253 current clamp is suitable for measuring currents of up to 2000 amps DC or 1500 amps AC.. Supplied with 4 mm (banana) plug type connectors.
Note: the PP253 current clamp is supplied with shrouded 4 mm (banana) plug type connectors so can not be plugged directly into a PicoScope oscilloscope. We recommend the use of the TA000 or TA020 automotive test lead to connect the current clamp to the oscilloscope. Alternatively the MI078 BNC to 4 mm plug adaptor can be used.
| Range |
0 - 1500 A AC
0 - 2000 A DC |
| Output Voltage |
1 mV per 1 A |
| AC Frequency Range |
50 Hz to 400 Hz |
|
