|
Agilent Technologies
(HP)
|
| HP 11590B | Broadband high power bias network |
| HP 11691D | Coaxial Directional Coupler, 2 GHz to 18 GHz |
| HP 11692D | 2GHz - 18GHz Dual Directional Coupler |
| HP 11708A | 30 dB Attenuator Pad (at 50 MHz) |
| HP 11713A | Attenuator/Switch Driver |
| HP 11729B | Carrier Noise Test Set |
| HP 11759C | RF Channel Simulator, 40 MHz to 2700 MHz |
| HP 11793A | Microwave Converter, opt C03,C04 |
| HP 11851A | Type N RF Cable Kit for Network Analysers |
| HP 11970A | Harmonic Mixer 26.5-40GHz |
| HP 11975A | 8 GHz Power Amplifier (w) |
| HP 16034B | Test Fixture |
| HP 16038A | Test Fixture |
| HP 16047C | HP / Agilent 16047C |
| HP 16063A | Test Lead |
| HP 16092A | Spring Clip Fixture |
| HP 16093A | Accessory Kit for HP 4191A |
| HP 16093B | Binding Post Test Fixture for HP 4191A |
| HP 16096A | 2-Port Fixture For 4192 |
| HP 16196A | Parallel Electrode SMD Test Fixture |
| HP 16196B | Parallel Electrode SMD Test Fixture |
| HP 33320G | Programmable Step Attenuator (DC - 4GHz : 0 - 70dB) SMA Type |
| HP 33320H | Programmable step attenuator, dc-18 GHz |
| HP 33321H/011 | Programmable 10 dB OEM step attenuator |
| HP 33322H | 5V Programmable Attenuator |
| HP 355C | 0-10 dB Step Attenuator |
| HP 355D | 0-120 dB Step Attenuator |
| HP 41800A | 41800A Active Probe, 5 Hz to 500 MHz |
| HP 423B | CRYSTAL DETECTOR |
| HP 43961A / 16092A | RF Impedance Test Adaptor Set (Inc. Short pt. no. 04191-85300, Open pt. no. 0419185302, 50 ohm term.pt. no. 04191/85301, ser. No. 04668, spring - clip term. conn. adaptor, short n-n type cable.) |
| HP 44476A | Microwave Switch Module |
| HP 4447B | Microwave Switch Plug-in |
| HP 5364A | Microwave Mixer Detector (w) |
| HP 58502A | Broadband Distribution Amplifier (w) |
| HP 775D | Dual Directional Coupler 450 - 940 MHz |
| HP 776D | Coaxial Dual-Directional Coupler, 0.94 to 1.90 GHz |
| HP 777D | Dual Directional Coupler 1.9-4.0GHz |
| HP 778D | 100MHz - 2GHz Co-Axial Dual Directional Coupler |
| HP 778D-012 | Type N (male) connector on main line test port |
| HP 779D | DIRECTIONAL COUPLER 1.7-12.4GHz. |
| HP 788C | Directional Detector 3.7 -8.3 GHz. |
| HP 796D | Directional Coupler |
| HP 798C | 3.7-8.3 GHz Directional Coupler |
| HP 83554A | Millimeter Wave Source Module 26.5 to 40 GHz |
| HP 83555A | Millimeter Wave Source Module 33 to 50 GHz |
| HP 83555A | Millimeter Wave Source Module 33 to 50 GHz |
| HP 83556A | Millimeter Wave Source Module 40 to 60 GHz |
| HP 83558A | Millimeter Wave Souce Module 75.0 to 110 GHz |
| HP 83590A/002 | 2GHz - 20GHz RF Sweeper Plug-in with optional 70dB Stepped Attenuator |
| HP 83592B/002 | 0.01GHz - 20GHz High Power RF Sweeper Plug-in with optional 70dB Stepped Attenuator |
| HP 83592C/002 | 0.01GHz - 20GHz Low Harmonics RF Sweeper Plug-in with optional 55dB Stepped Attenuator |
| HP 83595A/002 | 0.01GHz - 26.5GHz RF Sweeper Plug-in with optional 55dB Stepped Attenuator |
| HP 8447C | RF Power Amplifier 30-300 Mhz 30 DB GAIN |
| HP 8447F / H64 | Amplifier, Solid State: 1.3GHz |
| HP 8481A | Power Sensor |
| HP 8483A | Power Sensor |
| HP 8485D | 50MHz-26.5GHz Power Sensor +11708A |
| HP 84904L / 100 | Programmable Step Attenuator, DC to 40 GHz with opt 100 |
| HP 84907K / 104 | Programmable Step Attenuator, DC to 26.5 GHz with opt 104 |
| HP 8491B | 3 DB Attenuator |
| HP 8494A / 01 | Step Attenuator, DC - 4 GHz, 0 - 11dB, 1dB Steps |
| HP 8494B/001 | DC - 18 GHz manual step attenuator provides attenuation in 10 dB steps from 0 to 110 dB. |
| HP 8494G/002 | Programmable Step Attenuator, DC to 4 GHz, 0 to 11 dB, 1 dB steps |
| HP 8494H/001 | Prog. Step Attenuator (DC - 18GHz : 0 - 11dB) N Type |
| HP 8494H/002 | Prog. Step Attenuator (DC - 18GHz : 0 - 11dB) SMA Type |
| HP 8495A / 01 | Manual Step Attenuator, DC-4 GHz,0-70 dB, 10 dB Steps |
| HP 8495B/001 | 18 GHz manual step attenuator |
| HP 8495G/002/011/016/H88 | Programmable step attenuator, DC-4 GHz, 70dB |
| HP 8495H/001/002 | Programmable Step Attenuator (DC - 18GHz : 0 - 70dB) N Type |
| HP 8496B/001 | Manual Step Attenuator (DC to 18 GHz, 0 to 110 dB, 10 dB steps) |
| HP 8496G | Programmable Attenuator, 4 GHz, 110dB, 10 dB steps |
| HP 8496H/001 | Prog. Step Attenuator (DC to 18 GHz, 0 to 110 db, 10 db steps) |
| HP 8498A | High Power Attenuator, DC to 18 GHz |
| HP 85024A | High-Frequency Probe, 300 kHz to 3 GHz |
| HP 85025E | 10 MHz to 26.5 GHz Detector |
| HP 85032B | Calibration Kit, Type-N, 50 Ohms |
| HP 85033D | Calibration Kit, 3.5 mm |
| HP 85037B | 10 MHz to 26.5 GHz Precision Detector |
| HP 85044A | Transmission Reflection Test Set (w) |
| HP 85046A | S-Parameter Test Set |
| HP 85081B | High Impedance input Module : 1 GHz |
| HP 85110A/H81 | 1 - 18GHz S-Parameter Test set |
| HP 8514A | 500MHz to 18 GHz S Parameter test set |
| HP 8514B | 45 MHz to 20 GHz, S Parameter Test Set |
| HP Q8486A | Power Sensor |
| HP R347B | Noise Source 26.5-40GHz |
| HP X281A | ADAPTER Waveguide to Type-N (f) Adapter, X-Band, 12.4 GHz |
| HP X281B | ADAPTER Coaxial to Waveguide Adapter [Obsolete] |
| HP X281C | ADAPTER Waveguide to APC-7 Adapter, X-Band, 12.4 GHz |
| HP X424A | Waveguide Crystal Detector |
