GSP-830 Datasheet
|
3GHz Spectrum Analyzer
GW Instek GSP-830 Features
- Low Noise Floor(-117dBm@1GHz, 3k RBW)
- Sequence Programming Functions
- ACPR, OCBW, Channel Power, N-dB and Phase Jitter Measurements
- 10 Markers with Delta Marker, Peak Functions
- AC/DC/Battery(Option)three modes of power supply
- 6.4 Inch TFT Color LCD, Resolution: 640x480
- Optional Tracking Generator
- Interface : RS-232, USB, GPIB, VGA Output
- Optional Preamplifier
|
|
GW Instek GSP-830 Specification
|
Model No
|
Frequency Range
|
Aging
|
RBW
|
Video Bandwidth
|
|
GSP-830 |
9kHz ~ 3GHz |
± 10ppm, 0~50°C, 5ppm/yr |
3kHz, 30kHz, 300kHz, 4MHz |
10Hz ~ 1MHz in 1-3 steps |
GSP-830 Description
3GHz Spectrum Analyzer
GSP-830 Featuring high performance, uncompromised design, and
remote monitoring software, the GSP-830 3GHz Spectrum Analyzer is the latest evolution from GWInstek. The GSP-830
is one of the most advanced Spectrum Analyzer GWInstek has produced to date. The GSP-830 has an exceptional
noise floor of -152dBm/Hz; combined with the optional GAP-802 preamplifier, the noise floor can reach a remarkable
-172dBm/Hz. With a low noise floor, the GSP-830 is more than capable of finding limits; Trace Detection, combined
with an easy-to-use interface, makes the GSP-830 an ideal solution for spectrum analysis. Using the Auto Sequence
mode, advanced users can define their own macros in 10 Sequence sets. Repeat or Single run mode can be used
to streamline repetitive tasks. PC connection is effortless and versatile supporting USB host/device, RS232C,
VGA and GPIB (optional) for remote monitoring, control and analysis.
Wide Measurement Range
With GW Instek's state-of-the-art design, the GSP-830's outstanding
low noise floor level of -152dBm/Hz at 1GHz has extreme sensitivity for picking up weak signals. Along with
the GAP-802 20dB-gain preamplifier, the GSP-830 reaches an equivalent noise floor level as low as -172dBm/Hz,
further extending the measurement range.
Portable Power Operations
Equipped with two packs of Li-ion batteries, the GSP-830 can maintain
normal operation for more than 3 hours. In DC operation mode, the GSP-830 can be powered by a 12-Volt power
supply or a standard cigarette lighter in an automobile. The large internal memory of the GSP-830 means mass
storage of measured traces, setup information, limit lines and user-defined macros is possible. With USB flash
drive support for mass storage, weighing 6kg and a compact size, the GSP-830 is also a convenient tool for service
engineers out in the field.
|
