Analytical Electronics Services Pvt Ltd

Budgetary Source of Test & Measuring Equipment

Authorized Distributor

AES, India - Authorized Distributor of Pico Technology   AES, India - Authorized Distributor of GW Instek   AES, India - Authorized Distributor of DranetzBMI
Buy Sell Rent Repair

Oscilloscope Accessories

Our range of oscilloscope accessories have been carefully chosen for use with PicoScope USB Oscilloscopes.

Passive oscilloscope probes

Our passive oscilloscope probes are available in bandwidths from 60 MHz up to 1.5 GHz. All probes feature BNC connectors.

Model No

Bandwidth

Attenuation

Input Resistance

Input Capacitance

Maximum Working Voltage

MI007 60 MHz x1 / x10 x1: 1 MΩ
x10: 10 MΩ
x1: 46 pF plus scope
x10: ≈15 pF
600 V DC incl AC pk
MI103 250 MHz x1 / x10 x1: 1 MΩ
x10: 10 MΩ
x1: 46 pF plus scope
x10: ≈11 pF
600 V DC incl AC pk
MI145 250 MHz#1 x1 / x10 x1: 1 MΩ
x10: 10 MΩ
x1: 46 pF plus scope
x10: ≈11 pF
600 V DC incl AC pk
TA049 500 MHz x10 10 MΩ#2 ≈11 pF 600 V DC incl AC pk
TA061 (SMA) 1.5 GHz x10 500 Ω 2 pF 12 V DC incl AC pk
TA062 (BNC) 1.5 GHz x10 500 Ω 2 pF 12 V DC incl AC pk


#1Calibrated for use with the PicoScope 5000 Series.

#2When used with oscilloscopes with 1 MΩ input.

Active oscilloscope probes

Our active differential probes have bandwidths of up to 800 MHz and differential voltage ranges from ±15 V to ±7 kV.

Model No

Bandwidth

Attenuation

Differential voltage range

Common mode voltage range

Input impedance

TA041 25 MHz x10 / x100 ±70 V / ±700 V 4 MΩ / 5.5 pF
TA057 25 MHz x20 / x200 ±140 V / ±1400 V ±1400 V 4 MΩ / 5.5 pF
TA058 50 MHz x10 ±70 V ±700 V 1.6 MΩ / 7 pF
TA044 70 MHz x100 / x1000 ±700 V / ±7000 V ±7000 V 10 MΩ / 10 pF
TA043 100 MHz x10 / x100 ±70 V / ±700 V ±700 V 4 MΩ / 7 pF
TA042 100 MHz x100 / x1000 ±140 V / ±1400 V ±1400 V 4 MΩ / 7 pF
TA045 200 MHz x10 ±60 V ±20 V 500 kΩ / 7 pF
TA046 800 MHz x10 ±15 V ±30 V 100 kΩ / 2 pF


PicoScope Carry Case



PicoScope MI136 Carry Case

The PicoScope MI136 Carry Case can be used to protect your PicoScope Oscilloscope when used in the field, and to safely store it when it’s not needed.


The case uses high-density foam to securely hold the PicoScope 2202, 3200 range and 4000 Series in place, preventing movement and providing cushioning to prevent damage. Space is also proved to store leads and scope probes.


Note: the PicoScope carry case is also supplied with our oscilloscope kits.


External dimensions: approximately 340 x 270 x 83 mm (13.4 x 10.6 x 3.3 in)

PicoScope Protective Rubber Case

PicoScope PP691 PicoScope Protective Rubber Case


The PicoScope protective rubber case PP691 helps absorb potentially damaging physical shocks to your PicoScope 4000 Series oscilloscope whilst still giving you unobstructed access to all connectors.


A replaceable hanging bracket on the case also allows your PicoScope to be hung from a suitable hook — perfect for when you’re short on space.

BNC Attenuator Set




TA050 Attenuators




Related Links

PicoScope 6 Software  |  PC Oscilloscope



(All trademarks acknowledged) E. & O. E.

The TA050 attenuator set consists of four coaxial attenuators designed for use with signals up to 1 GHz. Each attenuator has a male and a female BNC connector.

Please note: The TA050 attenuators must be used with a matched 50-ohm source and load. If you wish to attenuate a signal before feeding it into a high-impedance measuring instrument, you must add a 50 ohm feedthrough terminator such as the Pico Technology TA051 feedthrough terminator.

TA050 Specifications

Bandwidth DC to 1 GHz
Attenuation 3 dB, 6 dB, 10 dB, 20 dB
Maximum power dissipation 1 W
Input impedance 50 Ω
Output impedance 50 Ω
VSWR 1.5:1 or better
Dimensions 56 x 20 x 17 mm (approximately 2.2 x 0.8 x 0.7 in)
Connectors BNC, 1 male + 1 female
Construction Shielded inner box with plastic shell
Weight 24 g (approximately 0.85 oz) each



Ask for TA050 detailed specification.


Feed-Through Terminator


TA051 Feed-Through Terminator


Related Links

PicoScope 6 Software  |  PC Oscilloscope



(All trademarks acknowledged) E. & O. E.

The TA051 feedthrough attenuator is a coaxial terminator with BNC connectors. It is useful for connecting signals from 50-ohm sources into instruments with high-impedance inputs, such as oscilloscopes.


TA050 Specifications

Bandwidth DC to 1 GHz
Maximum power dissipation 1 W
Input impedance 50 Ω
Dimensions 56 x 20 x 17 mm (approximately 2.2 x 0.8 x 0.7 in)
Connectors BNC, 1 male + 1 female
Construction Shielded inner box with plastic shell
Weight 24 g (approximately 0.85 oz) each



Ask for TA051 detailed specification.


TA095 IEPE Accelerometer

TA095 IEPE Accelerometer
TA096 Mounting Magnet
Related Links

PicoScope 6 Software  |  PC Oscilloscope

(All trademarks acknowledged) E. & O. E.

The TA095 is a single-axis IEPE accelerometer that is suitable for use in a wide-range of applications.


Note: The TA095 can be used with any suitable device that provides a constant-current IEPE power source, such as the PicoScope 4224 IEPE.


TA096 Mounting Magnet


The TA096 mounting magnet is used to securely mount the TA095 IEPE Accelerometer to ferrous materials.


For details please see TA095 / TA096 Introductory Guide.