Analytical Electronics Services Pvt Ltd

Budgetary Source of Test & Measuring Equipment

Authorized Distributor

AES, India - Authorized Distributor of Pico Technology    AES, India - Authorized Distributor of DranetzBMI    AES, India - Authorized Distributor of Pintech
Buy Sell Rent Repair

GW Instek LCR-8000G Series LCR Meter

GW Instek Series LCR Meter (LCR-8000G)

LCR-8000G Datasheet


GW Instek LCR-8000G Series Features

  • Wide Test Frequency 20Hz ~ 10/5/1MHz
  • 0.1% Basic Accuracy & 6 Digits Measurement Resolution
  • Large LCD Display with Intuitive Interface
  • Full Measuring Functions with DUT V/I Monitor
  • PASS/FAIL Function ( abs, % or delta) with Judgment Alarm
  • DC Resistance Measurement
  • Multiple Step Mode
  • Interface : RS-232, GPIB

LCR-8000G Description

The LCR-8000G Series LCR meter, with test frequency up to 10MHz, provides accuracy, versatility and high resolution for a wide range of component measurements, even including DC resistance measurement and Voltage/Current monitoring. The Multi-Step function allows on-screen programming of customized measurement sequence with Pass/Fail indication. Each program includes 30 test steps and each test step can be set with selected parameters and test limits. Under Multi-Step operation, a tedious work routine can be done step by step automatically just at a press of a button. With Graph Mode, LCR-8110G, LCR-8105G and LCR-8101G display the component impedance response either over a wide range of test frequency sweep or over a wide range of test voltage sweep in a graph chart. This gives an analysis result of either impedance vs. frequency or impedance vs. applied voltage all at a glance. GPIB and RS-232C interfaces are available as standard for instrument control and test result display on the PC. The rich features of LCR-8000G Series easily make your measurement tasks done at a very competitive price.

The Smarter Way to Characterize Component

The LCR-8000G Series is designed to perform precision impedance measurements over a wide frequency range of 20Hz~10MHz for LCR-8110G, 20Hz~5MHz for LCR-8105G and 20Hz~1MHz for LCR-8101G.The instrument is capable of measuring 11 different parameters with0.1% basic accuracy, which meets the precision measurement requirements of components and modules used in the RF circuits. The large LCD display with single-layer operation menu of LCR-8000GSeries provides users with ultimate convenience to plug and play without much learning time.

In the Pass/Fail test, primary parameter measurement result is compared with user-defined limits and the pass or fail result is then displayed. Three methods, including absolute limit, percentage and delta limit, are available for Hi(high) and Lo(low) limit setting based on the nominal test value. The Pass/Fail test checks whether the parameter measurement result sits within the limits, then display "PASS" for within the limits, or "LO" for lower than the low limit, or "HI" for higher than the high limit. A scale and bar for displaying measurement result is shown at the center of the screen to give a graphical identification, which greatly reduces operator's load in a long time inspection work. This scale and bar also facilitate the adjustment of the variable components. Either Pass or Fail result can be set with a buzzer alarm, which makes component or material sorting easy with sound identification.

For Pricing Information

LCR-8000G Price



Related Links
GW Instek  |  Digital Meters
Test Equipment AES


(All trademarks acknowledged) E. & O. E.

LCR-8000G Accessories

  • User manual x1
  • Power cord x1
  • LCR-12 x1

LCR-8000G Optional Accessories

  • LCR-05 :Test Fixture for axial & radial leaded components
  • LCR-06A : Test Lead with Kelvin clip (4 wire type)
  • LCR-07 : Test Lead with Alligator clip (2 wire type)
  • LCR-08 : Test Fixture (Tweezers) for SMD/Chip components
  • +++++

Feel free to contact us for any queries you may have.